Figure 130: M40 Router Power Supplies - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

Figure 130: M40 Router Power Supplies

Documentation

M40e Router Power Supplies

Checklist for Monitoring Power Supplies on page 273

The M40e router uses either AC or DC power. Two load-sharing, pass-through power

supplies are located at the bottom rear of the chassis.

M40e router power supplies and where they are installed in the chassis.

When the power supplies are installed and operational, they automatically share the

electrical load. If a power supply stops functioning for any reason, the remaining power

supplies instantly begin providing all the power the router needs for normal functioning,

and can provide full power indefinitely.

Chapter 10: Monitoring Power Supplies

Figure 131 on page 282