Table 82: T1600 Router Delta Ac Power Supply Leds - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
298
Table 81: T1600 Router DC Power Supply LEDs (continued)
LED Color
Green
INPUT
—One
PRESENT
per input
OVER Yellow
TEMP —One
per power
supply
Table 82 on page 298 describes the functions of the T1600 router AC power supply LEDs.

Table 82: T1600 Router Delta AC Power Supply LEDs

LED Color
AC OK —One per Green
power supply
–
DC OK —One per Blue
power supply
–
Yellow
OVER
—One per
TEMP
power supply
–
Table 83 on page 299 describes the functions of the TX Matrix two-input 160-A DC power
supply LEDs.
State Description
On steadily Input is receiving voltage.
Off Input voltage is not present.
On steadily Power supply has exceeded the recommended
temperature.
Off Power supply is within the recommended
temperature or the power supply is not on.
State
On steadily
Off
On steadily
Blinking
Off
On steadily
Off
Copyright © 2012, Juniper Networks, Inc.
Description
The AC terminal block is receiving
voltage.
The AC terminal block is not
receiving voltage.
Power supply is functioning
normally.
Power supply is starting up, or is not
functioning or operating properly,
or is not properly installed.
The power supply fails or the AC
terminal block is not receiving
voltage.
Power supply has exceeded
recommended temperature.
If the DC OK and AC OK are on
steadily, this LED indicates that
power supply is within the
recommended temperature.