Obtain Cfeb Hardware Information; Display The Cfeb Hardware Information; Display The Cfeb Firmware Information - Juniper M Series Monitoring And Troubleshooting Manual

Related
Documentation

Obtain CFEB Hardware Information

Display the CFEB Hardware Information

Purpose
Action
Sample Output
Meaning

Display the CFEB Firmware Information

Purpose
Action
Copyright © 2012, Juniper Networks, Inc.
Align the rear of the CFEB with the guides inside the chassis and slide it in completely.
10.
Press the ejector lever at each end of the CFEB inward.
11.
Do not stack CFEBs on top of or under other components. Place each one individually in
an electrostatic bag or on its own antistatic mat on a flat, stable surface.
Checklist for Monitoring the CFEB on page 517
To display CFEB hardware information:
Display the CFEB Hardware Information on page 529
1.
Display the CFEB Firmware Information on page 529
2.
3. Locate the CFEB Serial Number ID Label on page 530
To obtain the CFEB hardware information.
To display the CFEB hardware information, use the following command:
user@host> show chassis hardware
user@host> show chassis hardware
Hardware inventory:
Item Version
Chassis
Midplane REV 04
Power Supply 0 Rev 02
Routing Engine REV 09
CFEB REV 04
FPC 0
FPC 1
PIC 2
PIC 3 REV 04
The command output displays the CFEB version level, part number, serial number, and
description.
To display the firmware information running on the CFEB.
To display the firmware running on the CFEB, use the following command:
user@host> show chassis firmware
Part number Serial number
30512
710-008761 CB9213
740-008985 QB12884
740-009459 1000482742
750-010112 CB8664
BUILTIN BUILTIN
750-009099 CB9103
Chapter 24: Monitoring the CFEB
Description
M7i
M7i Midplane
DC Power Supply
RE-5.0
Internet Processor II
E-FPC
E-FPC
1x Tunnel
1x G/E, 1000 BASE
529