Table 111: Sib Alarm Messages; Displaying Sib Alarms; Display Current Sib Alarms - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Related
Documentation

Displaying SIB Alarms

Display Current SIB Alarms

Purpose
Action
Sample Output
Meaning
424
The command output displays the SIB slot, status, and temperature of the air flowing
past the SPP card and the power supply voltages.
You can display the environmental status of a particular SIB with the following command:
user@host>show chassis environment sib slot
Monitoring the SIBs on page 413
To display SIB alarms and error messages:
1. Display Current SIB Alarms on page 424
Display SIB Error Messages in the System Log File on page 425
2.
Display SIB Error Messages in the Chassis Daemon Log File on page 425
3.
To determine the details of the current SIB alarms.
Table 111 on page 424 lists the SIB alarms that display in the craft interface LCD display
and at the command line. For conditions that trigger SIB alarms, see
Router Alarms" on page 67.

Table 111: SIB Alarm Messages

Component LCD Short Version
SIB SIB sib-number Failure
SIB sib-number Removed
Spare SIB Failure
Spare SIB Removed
Check SIB
To display the SIB environmental information, use the following command:
user@host>show chassis alarms
t640@host> show chassis alarms
1alarms currently active
Alarm time
2004-01-29 18:37:09 PST
The command output displays the alarm date, time, severity level, and description
CLI Long Version
RED ALARM—SIB sib-number Fault
RED ALARM—SIB sib-number Absent
YELLOW ALARM—Spare SIB Fault
YELLOW ALARM—Spare SIB Absent
YELLOW ALARM—Check SIB
Class Description
Minor SIB 2 Not Online
Copyright © 2012, Juniper Networks, Inc.
"Display the Current