Table 87: Power Supply Serial Number Id Label Locations On M Series And T - Juniper M Series Monitoring And Troubleshooting Manual

Meaning
Locate the Power Supply Serial Number ID Label
Purpose
Action
Copyright © 2012, Juniper Networks, Inc.
PEM 1 Rev 01
[...Output truncated...]
For all routers except the M160 and T320 routers and the T640 router, the command
output displays the power supply slot number, revision level, part number, serial number,
and the power supply type. When facing the back of the router, power supply A is located
on the right and power supply B is located on the left.
For the M160, T320, T640, and the T1600 router, the command output displays the
power supply or PEM slot number, revision level, part number, serial number, and power
supply type. When facing the back of the router, PEM 0 is located on the right and PEM
1 is located on the left.
To locate the serial number ID on the power supply.
To locate the power supply serial number ID label,
141 on page 310 through Figure 152 on page
Table 87: Power Supply Serial Number ID Label Locations on M Series
and T Series Routers
Power Supply
Router Type
M5 and M10 AC, DC
M7i and M10i AC, DC
M20 AC, DC
M40 AC, DC
M40e AC
DC
M120 AC
DC
M160 DC
M320 AC, DC
T320, T640, DC
T1600, TX
Matrix, and TX
Matrix Plus
740-001243 kj35756
seeTable 87 on page 309
315.
Serial Number ID Label Location
Power supply faceplate
Power supply faceplate
Right side of the power supply back
Top of the power supply
Upper center of the power supply faceplate
Left center of the power supply faceplate
AC power supply faceplate under the cpower switch
DC power supply faceplate under the circuit breaker switch
Left center of the power supply faceplate
On the power supply faceplate under the circuit breaker
switch
Left side of the power supply faceplate
Chapter 10: Monitoring Power Supplies
DC
and Figure
309