Obtain Hcm Hardware Information; Display The Hcm Hardware Information; Locate The Hcm Serial Number Id Label - Juniper M Series Monitoring And Troubleshooting Manual

Obtain HCM Hardware Information

Display the HCM Hardware Information

Purpose
Action
Sample Output
Meaning

Locate the HCM Serial Number ID Label

Purpose
Action
Copyright © 2012, Juniper Networks, Inc.
CAUTION: Align the Routing Engine carefully with the guide rails and push
it in evenly. Damage can result if it gets lodged in the rails because of
uneven movement.
Tighten the thumbscrews on the Routing Engine faceplate to secure the Routing
6.
Engine.
Use the show chassis environment hcm command to verify that the HCM is functioning
7.
correctly.
To obtain HCM hardware information:
Display the HCM Hardware Information on page 541
1.
Locate the HCM Serial Number ID Label on page 541
2.
To display information about the HCM hardware.
To display the HCM hardware information, use the following command:
user@host>show chassis hardware
user@host> show chassis hardware
Hardware inventory:
Item Version
Chassis
Midplane REV 04
Power Supply 0 Rev 05
Power Supply 1 Rev 05
HCM slot 0 REV 05
HCM slot 1 REV 05
[...Output truncated...]
The command output displays the HCM version level, part number, serial number, and
description.
To locate the serial number ID on the HCM.
To locate the HCM serial number ID label, look near the front of the component on the
right side (see Figure 273 on page 542
Part number Serial number
30700
710-008920 CB8867
740-008537 QB12637
740-008537 QB12537
710-008661 CC1145
710-008661 CC1138
Chapter 25: Monitoring the HCM
Description
M10
M10i Midplane
AC Power Supply
AC Power Supply
M10i HCM
M10i HCM
541