Get Scg Hardware Information; Display The Scg Hardware Information; Locate The Scg Serial Number Id Label - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Related
Documentation

Get SCG Hardware Information

Display the SCG Hardware Information

Purpose
Action
Sample Output
Meaning

Locate the SCG Serial Number ID Label

Purpose
Action
410
If the replaced SCG is online, the removed SCG has failed. Return the SCG as described
in "Return the Failed Component" on page
Checklist for Monitoring the SCG on page 401
To get the SCG hardware information:
Display the SCG Hardware Information on page 410
1.
Locate the SCG Serial Number ID Label on page 410
2.
To obtain the SCG hardware information.
To display the SCG hardware information, use the following command:
user@host> show chassis hardware
user@host> show chassis hardware
Hardware inventory:
Item Version
Chassis
Midplane REV 01
FPM GBUS REV 02
FPM Display REV 02
CIP REV 05
PEM 1 Rev 01
SCG 0 REV 06
SCG 1 REV 06
The command output displays the SCG slot number, revision level, part number, and
serial number.
To locate the serial number ID on the SCG.
The serial number is located on the top of the SCG, close to the midplane connector (see
Figure 224 on page 411).
116.
Part number Serial number
abcdef
710-004339 AY4529
710-004461 AY4511
710-002897 HF6094
710-002895 HC0468
740-004359 2708013
710-004455 AY4526
710-004455 AY4523
Description
T320
Power Entry Module
Copyright © 2012, Juniper Networks, Inc.