Test The Power Supply; Getting Power Supply Hardware Information; Displaying The Power Supply Hardware Information - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide

Test the Power Supply

Purpose
Action
Related
Documentation

Getting Power Supply Hardware Information

Displaying the Power Supply Hardware Information

Purpose
Action
Sample Output
308
To verify power supply failure by testing the power supply.
On certain power supplies (M5/M10, M40e, and M160 routers), a self-test button is used
to test the power supply, It is located beneath the power supply LEDs.
TIP: The self-test button is for use by qualified service personnel only
Power Supplies Overview on page 275
To get the power supply hardware information:
Displaying the Power Supply Hardware Information on page 308
1.
2. Locate the Power Supply Serial Number ID Label on page 309
To obtain the power supply hardware information.
To display power supply hardware information, use the following command:
user@host> show chassis hardware
For M5, M10, M20, M40, and M40e routers:
user@host> show chassis hardware
Hardware inventory:
Item Version
Chassis
Backplane REV 07
Power Supply A Rev 02
Power Supply B Rev 01
[...Output truncated...]
For M160, T320, T640, and T1600 routers:
show chassis hardware
user@host>
Item Version
Chassis
Midplane REV 02
FPM CMB REV 01
FPM Display REV 01
CIP REV 02
PEM 0 Rev 01
Part number Serial number
2003
710-001517 AA7940
740-001465 000497
740-001465 000001
Part number Serial number
47
710-001245 AB4113
710-001642 AA9721
710-001647 AA2995
710-001593 AA9886
740-001243 KJ35782
Description
M20
AC
AC
Description
M160
DC
Copyright © 2012, Juniper Networks, Inc.