Figure 305: M160 Router Redundant Power Supplies - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

M Series and T Series Routers Monitoring and Troubleshooting Guide

Figure 305: M160 Router Redundant Power Supplies

Documentation

T1600 Redundant Power Supplies

Checklist for Monitoring Redundant Power Supplies on page 607

The T1600 Core Router has two redundant, load-sharing power supplies, located at the

lower rear of the chassis in slots PEM0 and PEM1 (top to bottom).

shows the T1600 router power supplies and where they are installed in the chassis.

When the power supplies are installed and operational, they automatically share the

electrical load. If a power supply stops functioning for any reason, the remaining power

supplies instantly begin providing all the power the router needs for normal functioning,

and can provide full power indefinitely.

Figure 306 on page 617