Figure 87: Fpc Numbering; Checking The Fpc Status - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

M Series and T Series Routers Monitoring and Troubleshooting Guide

Figure 87: FPC Numbering

Documentation

Check FPC Status and Utilization

FPCs are hot-insertable and hot-removable. You can remove and replace them without

powering down the router or disrupting the routing functions.

Checklist for Monitoring FPCs on page 213

To check the FPC status:

Check FPC Status and Utilization on page 216

Check FPC Status and Uptime on page 217

Checking FPC Status and Temperature on page 218

Checking FPC Status and Temperature in a T1600 Router on page 218

Checking the FPC LED States on page 219

To confirm that the FPC is functioning properly by checking the status and utilization

information for all FPCs installed in the router.

To display brief status and utilization information for FPCs installed in the router, use the

following operational mode command:

user@host> show chassis fpc