Obtain Ssb Hardware Information; Display The Ssb Hardware Information; Locate The Ssb Serial Number Id Label - Juniper M Series Monitoring And Troubleshooting Manual

Related
Documentation

Obtain SSB Hardware Information

Display the SSB Hardware Information

Purpose
Action
Sample Output
Meaning

Locate the SSB Serial Number ID Label

Purpose
Action
Copyright © 2012, Juniper Networks, Inc.
Grasp the front of the SSB card carrier with both hands and align the back of the card
8.
carrier with the slide guides on the chassis.
Slide the SSB card carrier all the way into the card cage until it contacts the midplane.
9.
Flip the extractor clips, located on the left and right sides of the card carrier, towards
10.
each other to secure the SSB in place.
Tighten the thumbscrews on the left and right sides of the card carrier to seat the
11.
SSB.
NOTE: To seat the SSB properly, be sure to tighten the screws securely.
If the SSB is not seated properly, it will not function.
Checklist for Monitoring the SSB on page 505
Display the SSB Hardware Information on page 513
1.
Locate the SSB Serial Number ID Label on page 513
2.
Display the SSB Firmware Version on page 514
3.
To obtain the SSB hardware information.
To display the SSB hardware information, use the following command:
user@host> show chassis hardware
user@host> show chassis hardware
Hardware inventory:
Item Version
[...Output truncated...]
SSB slot 0 REV 01
SSB slot 1 N/A
[...Output truncated...]
The command output displays the SSB version level, part number, serial number, and
description.
To locate the serial number ID on the SSB.
To locate the SSB serial number ID label, look on the top of the SSB adjacent to the
SDRAM memory bank. See
Part number Serial number
710-001951 AD5904
N/A N/A
Figure 265 on page 514.
Chapter 23: Monitoring the SSB
Description
Internet Processor II
backup
513