Figure 153: Tx Matrix Plus Router Dc Power Supply Serial Number Label; Replacing The Power Supplies - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

M Series and T Series Routers Monitoring and Troubleshooting Guide

Documentation

Documentation

Figure 153: TX Matrix Plus Router DC Power Supply Serial Number Label

Serial number ID label

Power Supplies Overview on page 275

The power supplies are hot-removable and hot-insertable. You can remove or replace

a power supply without powering down the system and disrupting routing functions.

However, you must power down the power supply before removing it from the router.

When one power supply is powered down, the other power supply automatically assumes

the entire electrical load for the router.

The circuit breaker box is not hot-removable or hot-pluggable. You

must power down the router to remove the circuit breaker box.

To return a failed power supply, see

replace the power supplies, see the appropriate router hardware guide.

Power Supplies Overview on page 275

"Return the Failed Component" on page