Audience; Supported Routing Platforms - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

M Series and T Series Routers Monitoring and Troubleshooting Guide

Audience

Junos OS System Basics Configuration Guide—Describes Juniper Networks routing

platforms, and provides information about how to configure basic system parameters,

supported protocols and software processes, authentication, and a variety of utilities

for managing your router on the network.

For information about related tasks performed by Network Operations Center (NOC)

personnel, see the following network operations guides:

Junos OS Baseline Operations Guide

Junos OS Network Interfaces Operations Guide

This guide is designed for Network Operations Center (NOC) personnel who monitor a

Juniper Networks M Series or T Series routing platform.

To use this guide, you need a broad understanding of networks in general, the Internet

in particular, networking principles, and network configuration. You must also be familiar

with one or more of the following Internet routing protocols:

Border Gateway Protocol (BGP)

Routing Information Protocol (RIP)

Intermediate System-to-Intermediate System (IS-IS)

Open Shortest Path First (OSPF)

Internet Control Message Protocol (ICMP) router discovery

Internet Group Management Protocol (IGMP)

Distance Vector Multicast Routing Protocol (DVMRP)

Protocol-Independent Multicast (PIM)

Multiprotocol Label Switching (MPLS)

Resource Reservation Protocol (RSVP)

Simple Network Management Protocol (SNMP)

Personnel operating the equipment must be trained and competent; must not conduct

themselves in a careless, willfully negligent, or hostile manner; and must abide by the

instructions provided by the documentation.

For the features described in this manual, Junos OS currently supports the following

routing platforms: