Check For Cip Alarms; Display Current Cip Alarms; Display Cip Error Messages In The System Log File - Juniper M Series Monitoring And Troubleshooting Manual

Sample Output
Meaning
Related
Documentation

Check for CIP Alarms

Display Current CIP Alarms

Purpose
Action
Sample Output
Meaning

Display CIP Error Messages in the System Log File

Purpose
Action
Sample Output
Copyright © 2012, Juniper Networks, Inc.
user@host> show chassis environment
Class Item
[...Output truncated...]
Misc CIP
The command output displays the status for the CIP, which can be
Checklist for Monitoring the CIP on page 479
To check for CIP alarms:
Display Current CIP Alarms on page 483
1.
Display CIP Error Messages in the System Log File on page 483
2.
Display CIP Error Messages in the Chassis Daemon Log File on page 484
3.
To view the current CIP alarms in the command line.
To display the current CIP alarms, use the following command:
user@host> show chassis alarms
user@host> show chassis alarms
2 alarms currently active
Alarm time
2002-06-11 20:45:08 UTC
2002-06-11 20:45:07 UTC
The command output displays the alarm date, time, severity level, and description.
is the Ethernet connection to a management LAN.
To determine the details of the CIP error messages in the system log file.
To display the CIP error messages in the system log file, use the following CLI command:
user@host> show log messages
user@host> show log messages
Jun 11 20:45:07 hissy-re0 /kernel: fxp0: link media DOWN 10Mb / half-duplex
Jun 11 20:45:07 hissy-re0 craftd[556]:
Jun 11 20:45:07 hissy-re0 alarmd[555]: Alarm set: fxp0 color=RED, class=ETHER,
Status Measurement
OK
Class Description
Major Connector Interface Panel Missing
Major fxp0: ethernet link down
Major alarm set, fxp0: ethernet link down
Chapter 21: Monitoring the CIP
, , or .
OK Absent Failed
fxp0
483