Figure 252: M40E And M160 Router Pcg Location; Monitor The Pcg Status; Monitor The Pcg Environmental Status - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Related
Documentation

Monitor the PCG Status

Monitor the PCG Environmental Status

Purpose
Action
Sample Output
468

Figure 252: M40e and M160 Router PCG Location

Checklist for Monitoring the PCG on page 465
To monitor the PCG status:
Monitor the PCG Environmental Status on page 468
1.
2. Display the PCG LED States at the Command Line on page 469
Check the PCG LED States on the Faceplate on page 470
3.
To monitor the PCG environmental status.
To monitor the PCG environment status, use the following command:
user@host> show chassis environment
user@host> show chassis environment
Class Item
Power PEM 0
PEM 1
Temp PCG 0
Status Measurement
OK
OK
OK 41 degrees C / 105 degrees F
Copyright © 2012, Juniper Networks, Inc.