Juniper M Series Monitoring And Troubleshooting Manual page 691

Meaning
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
Fan Tray 4 Fan 1
Fan Tray 4 Fan 2
Fan Tray 4 Fan 3
Fan Tray 4 Fan 4
Fan Tray 4 Fan 5
Fan Tray 4 Fan 6
Fan Tray 4 Fan 7
Fan Tray 4 Fan 8
Fan Tray 4 Fan 9
Fan Tray 5 Fan 1
Fan Tray 5 Fan 2
Fan Tray 5 Fan 3
Fan Tray 5 Fan 4
Fan Tray 5 Fan 5
Fan Tray 5 Fan 6
Fan Tray 5 Fan 7
Fan Tray 5 Fan 8
Fan Tray 5 Fan 9
The command output shows the fans, impellers, or blowers monitored for the router
type. The command output displays the fan, impeller, or blower status and the spinning
speed. The status can be
OK
indicates if the fan or impeller is spinning at normal or high speed.
Measurement
Checklist for Monitoring Redundant Cooling System Components on page 623
Chapter 31: Monitoring Redundant Cooling System Components
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
OK Spinning at normal speed
, (during initial power-on),
Testing
, or .
Failed Absent
647