Tools And Parts Required To Remove Components From An Mx2020 Router - Juniper MX2020 Hardware Manual

Universal routing platform

Hide thumbs Also See for MX2020:

Table of Contents

Tools and Parts Required to Remove Components from an MX2020 Router

To remove components from the router or the router from a rack, you need the following tools and parts:

2.5-mm flat-blade (–) screwdriver, for detaching alarm relay terminal block

7/16-in. (11 mm) nut driver

Blank panels to cover empty slots

EMI (electromagnetic interference) covers—shipped with router

Electrostatic bag or antistatic mat, for each component

Electrostatic discharge (ESD) grounding wrist strap

Flat-blade (–) screwdriver

Pallet jack with attachment—recommended

Router transport kit—recommended (optional)

Phillips (+) screwdrivers, numbers 1, 2, and 3

Rubber safety cap for fiber-optic interfaces or cable

Wire cutters

Table of Contents