Table 18: Operational Mode Commands For Router Monitoring - Juniper M Series Monitoring And Troubleshooting Manual

Copyright © 2012, Juniper Networks, Inc.
Use one of the operational mode s listed in .
3.

Table 18: Operational Mode Commands for Router Monitoring

Command
show version
show chassis firmware
show chassis hardware
show chassis environment
show chassis environment
component-name
show chassis craft-interface
show chassis alarms
Chapter 3: Method and Tools for Monitoring Router Components
Description
Displays the router hostname, model number, and version
of Junos OS running on the router.
Displays firmware and operating system version for router
components.
Displays an inventory of the hardware components
installed in the router, including the component name,
version, part number, serial number, and a brief
description.
Displays environmental information about the router
chassis, including the temperature and status.
Displays more detailed operational status information
about the following components:
M5, M10, M7i, M10i, M20 routers: Routing Engine
M40e and M160 routers: FPC, FPM, MCS, PCG, Power
Entry Modules (PEM), Routing Engine, and SFM
M120 router: Control Board, FEB, FPC, FPM, and Power
Entry Modules (PEM)
M320 router: Control Board, FPC, FPM, PEM, Routing
Engine, and SIB
T320, T640, T1600, TX Matrix, and TX Matrix Plus
routers: Control Board, FPC, FPM, PEM, Routing Engine,
SCG, and SIB
Displays operational status information about the router,
including the alarm status and LED status of major
components.
Displays the current router component alarms that have
been generated, including the date, time, severity level,
and description.
57