Table 107: Scg Alarm Messages; Display Scg Alarms; Display Current Scg Alarms; Display Scg Error Messages In The System Log File - Juniper M Series Monitoring And Troubleshooting Manual

Action
Related
Documentation

Display SCG Alarms

Display Current SCG Alarms

Purpose
Action
Sample Output
Meaning

Display SCG Error Messages in the System Log File

Purpose
Copyright © 2012, Juniper Networks, Inc.
Check the blue LED on the SCG faceplate. If this LED is on steadily, the SCG is
MASTER
functioning as master. See
Checklist for Monitoring the SCG on page 401
To display SCG alarms and error messages:
Display Current SCG Alarms on page 407
1.
Display SCG Error Messages in the System Log File on page 407
2.
3. Display SCG Error Messages in the Chassis Daemon Log File on page 408
To determine the details of the current SCG alarms on the router craft interface.
Table 107 on page 407 describes the SCG alarms that display on the router craft interface
LCD display at the CLI.

Table 107: SCG Alarm Messages

Component LCD Short Version
SCG
SCG SCG-number Failure
SCG SCG-number Removed
SCG SCG-number Not Online
For the conditions that trigger SCG alarms, see
page 67.
To display the current SCG alarms, use the following command:
user@host> show chassis alarms
t320@host> show chassis alarms
1 alarm currently active
Alarm time
2004-01-28 14:53:10 PST
The command output displays the alarm date, time, severity level, and description.
To determine the details of the SCG error messages in the system log file.
"Check the SCG LEDs States on the Faceplate" on page
CLI Long Version
RED ALARM
RED ALARM
YELLOW ALARM
Online
"Display the Current Router Alarms" on
Class Description
Minor SCG 0 Not Online
Chapter 15: Monitoring the SCGs
405.
—
SCG SCG-number Failure
— SCG SCG-number Failure
— SCG SCG-number Not
407