Monitoring The Fic; Checklist For Monitoring The Fic - Juniper M Series Monitoring And Troubleshooting Manual

CHAPTER 26

Monitoring the FIC

Checklist for Monitoring the FIC

Purpose
Action
Copyright © 2012, Juniper Networks, Inc.
Checklist for Monitoring the FIC on page 543
Understanding the FIC on page 544
Monitor the FIC Status on page 546
Display FIC Alarms on page 547
Display FIC Hardware Information on page 548
You monitor the Fixed Interface Card (FIC), which receives incoming packets from the
network and transmits outgoing packets to the network, providing support for Fast
Ethernet ports or Gigabit Ethernet interfaces, depending on which version of the FIC is
installed in the M7i router. You also monitor the FIC to view alarm status, and to perform
some system control functions, such as taking PICs online and offline. (See
page 543.)
Table 132: Checklist for Monitoring the FIC
Monitor FIC Tasks
"Monitor the FIC Status" on page 546
1. Understanding FIC Slot Numbering on
page 545
2. Display FIC Status at the Command Line
on page 546
3. Check FIC LEDs on page 546
"Display FIC Alarms" on page 547
1. Display the FIC Status on page 547
2. Display FIC Errors In the messages Log
File on page 547
3. Display FIC Errors in the chassisd Log File
on page 548
Command or Action
The FIC is located in FPC slot
1
show chassis pic pic-slot 3 fpc-slot 1
Look at the FIC faceplate LEDs.
show chassis pic pic-slot 3 fpc-slot 1
show log messages | match PIC 3
show log chassisd | match PIC 3
Look at the FIC faceplate LEDs.
Table 132 on
.
3
543