Figure 257: Cip Serial Number Id Label; Replace The Cip - Juniper M Series Monitoring And Troubleshooting Manual

Meaning
Locating the CIP Serial Number ID Label
Purpose
Action
Related
Documentation

Replace the CIP

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
[...Output truncated...]
CIP REV 02
[...Output truncated...]
The command output displays the CIP slot number, revision level, part number, and serial
number.
To locate the serial number ID on the CIP.
To locate the CIP serial number ID label, look on the top of the left side of the CIP (see
Figure 257 on page 487).

Figure 257: CIP Serial Number ID Label

Checklist for Monitoring the CIP on page 479
The CIP is field-replaceable, but is not hot-removable, hot-insertable, or hot-pluggable.
You must power down the router before removing or installing it.
To replace a the CIP, see "Return the Failed Component" on page
to return a field-replaceable unit in the M40e or M160 router hardware guide.
Checklist for Monitoring the CIP on page 479
710-001593 AA9564
Chapter 21: Monitoring the CIP
116, or the procedure
487