CHAPTER 18
Monitoring the SFMs
Checklist for Monitoring the SFMs
Purpose
Action
Copyright © 2012, Juniper Networks, Inc.
Checklist for Monitoring the SFMs on page 441
SFM Overview on page 442
Monitor the SFM Status on page 444
Display SFM Alarms on page 447
Verify SFM Failure on page 450
Obtain SFM Hardware Information on page 451
Replace the SFM on page 452
To monitor the Switching and Forwarding Modules (SFMs) and ensure that traffic
transiting the router is handled properly. (See
Table 114: Checklist for Monitoring the SFMs
Monitor SFM Tasks
"Monitor the SFM Status" on page 444
1.
Display the SFM Summary Status on
page 444
2.
Display the SFM LED Status at the
Command Line on page 445
3.
Check the SFM LED Status on the
Faceplate on page 446
4.
Display the SFM Environmental
Status on page 446
"Display SFM Alarms" on page 447
1.
Display Current SFM Alarms on
page 447
Table 114 on page
441.)
Command or Action
show chassis sfm sfm-slot
show chassis sfm detail sfm-slot
show chassis craft-interface
Check the SFM faceplate at the back
of the M40e and M160 router chassis.
show chassis environment
show chassis environment sfm sfm-slot
show chassis alarms
441