Figure 268: M10I Router Cfeb Component; Figure 269: M7I And M10I Router Cfeb Location; Monitor The Cfeb Status - Juniper M Series Monitoring And Troubleshooting Manual

Related
Documentation

Monitor the CFEB Status

Display the CFEB Environmental Status
Purpose
Action
Copyright © 2012, Juniper Networks, Inc.
configuring interfaces on the ASP–I, see the Junos OS Services Interfaces Configuration
Guide.
Figure 268 on page 521 shows the M10i router CFEB component.

Figure 268: M10i Router CFEB Component

You can install one CFEB in the M7i router from the rear of the router above the power
supplies. You can install one or two CFEBs from the rear of the M10i router chassis above
the fan tray (see Figure 269 on page

Figure 269: M7i and M10i Router CFEB Location

M7i rear
Compact Forwarding Engine Boards
Checklist for Monitoring the CFEB on page 517
To monitor the CFEB status:
Display the CFEB Environmental Status on page 521
1.
Display the CFEB Detailed Status on page 522
2.
3. Check CFEB LEDs on page 522
To isolate problems in the CFEB by checking the environmental status.
To display the CFEB environmental status, use the following command:
Chapter 24: Monitoring the CFEB
521).
M10i rear
CFEB0
CFEB1
FAN TRA
Y 1
C-FE B 0
C-FE B 1
P/S 3
P/S 1
P/S 2
P/S 0
NOTE :
P/S 0 AND
P/S 1 MUST
FOR NORM
AL OPER
FAN TRA
Y O
BE PRES
ENT
ATIO N.
521