Juniper M Series Monitoring And Troubleshooting Manual page 484

M Series and T Series Routers Monitoring and Troubleshooting Guide
Meaning
Related
Documentation
440
State
Temperature
Power:
3.3 V
5.0 V
12.0 V
5.0 V bias
8.0 V bias
BUS Revision
FPGA Revision
The
show chassis environment mcs
only. The command output displays environmental information about both MCSs installed
in the router or about an individual MCS. It displays the MCS status:
Offline , or Empty . The command also indicates whether the MCS is master. The command
output displays the temperature of the air flowing past the MCS, information about MCS
power supplies, field programmable gate array (FPGA) revision information, and the
revision level of the chassis management bus (CMB) backup.
Checklist for Monitoring the MCS on page 455
Host Module Overview on page 435
Online Standby
58 degrees C / 136 degrees F
3317 mV
5006 mV
11843 mV
4998 mV
8195 mV
12
255
command is available on the M40e and M160 routers
Copyright © 2012, Juniper Networks, Inc.
, ,
Present Online