Display Pcg Alarms; Display Current Pcg Alarms; Display Pcg Error Messages In The System Log File - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Related
Documentation

Display PCG Alarms

Display Current PCG Alarms

Purpose
Action
Sample Output
Meaning

Display PCG Error Messages in the System Log File

Purpose
Action
Sample Output
Meaning
472
Checklist for Monitoring the PCG on page 465
To display PCG alarms and error messages:
Display Current PCG Alarms on page 472
1.
Display PCG Error Messages in the System Log File on page 472
2.
Display PCG Error Messages in the Chassis Daemon Log File on page 473
3.
To determine the details of the current PCG alarms.
To display the current PCG alarms, use the following command:
user@host> show chassis alarms
user@host> show chassis alarms
2 alarms currently active
Alarm time
2002-06-11 20:30:29 PDT
2002-06-11 20:30:32 PDT
The command output displays the alarm date, time, severity level, and description.
To determine the details of the PCG error messages in the system log file.
To display the PCG error messages in the system log file, use the following CLI command:
user@host> show log messages
user@host> show log messages
Jun 11 20:31:31 myrouter chassisd[553]: CHASSISD_NO_GOOD_PCGS:
The system log file records the time the failure or event occurred, the severity
messages
level, a code, and a message description. You can also use the
command to see error messages that are generated when a PCG fails or is offline.
pcgs
Use this information to diagnose a problem and to let the Juniper Networks Technical
Assistance Center (JTAC) know what error messages were generated and the router
events that occurred before and after the problem. For more information about system
log messages, see the Junos OS System Log Messages Reference.
Class Description
Minor PCG 0 Not Online
Minor No PCGs Online
show log messages | match
Copyright © 2012, Juniper Networks, Inc.