Table 115: Sfm Leds - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Check the SFM LED Status on the Faceplate
Purpose
Action
Display the SFM Environmental Status
Purpose
Action
Sample Output
Meaning
446
To check the SFM LED status on the SFM faceplate.
To check the SFM LED status, remove the component cover and look on the SFM faceplate
at the back of the M40e and M160 routers (see
on page 446 describes the SFM LED states.

Table 115: SFM LEDs

Color Label
Green
OK
Amber
FAIL
To display the SFM environmental status.
To display the SFM environmental information, use the following command:
user@host> show chassis environment
user@host> show chassis environment
Class Item
Power PEM 0
PEM 1
Temp
[...Output truncated...]
SPP 0
SPR 0
SPP 1
SPR 1
SPP 2
SPR 2
SFM 3
[...Output truncated...]
The command output displays the status and temperature for the SFM and its two
serialized components: the SPP card and the SPR card.
If there is a problem with the SFM status, you can display more detailed environmental
information with the following command:
user@host> show chassis environment sfm
user@host> show chassis environment sfm
SFM 0 status:
State
"SFM Overview" on page
State
On steadily
Blinking
On steadily
Status Measurement
OK
OK
OK 37 degrees C / 98 degrees F
OK 46 degrees C / 114 degrees F
OK 38 degrees C / 100 degrees F
OK 48 degrees C / 118 degrees F
OK 39 degrees C / 102 degrees F
OK 54 degrees C / 129 degrees F
Offline
Online
442). Table 115
Description
SFM is functioning
normally.
SFM is starting up.
SFM has failed.
Copyright © 2012, Juniper Networks, Inc.