Juniper M Series Monitoring And Troubleshooting Manual page 627

Sample Output
Copyright © 2012, Juniper Networks, Inc.
Table 136: Logging Events (continued)
Event Code Description
The Routing Engine is configured as disabled.
E_CFG_D
The maximum number of tries to acquire or release mastership was
E_MAXTRY
exceeded.
E_REQ_C A claim mastership request was sent.
E_ACK_C A claim mastership acknowledgement was received.
E_NAK_C A claim mastership request was not acknowledged.
E_REQ_Y Confirmation of mastership is requested.
Mastership is acknowledged.
E_ACK_Y
Mastership is not acknowledged.
E_NAK_Y
A giveup mastership request was sent by a Routing Engine.
E_REQ_G
The Routing Engine acknowledges giveup of mastership.
E_ACK_G
The command
E_CMD_A
from the backup Routing Engine.
Force switchover command was issued.
E_CMD_F
The command
E_CMD_R
from the master Routing Engine.
The command
E_CMD_S
a Routing Engine.
E_NO_ORE No other Routing Engine is detected.
E_TMOUT A request timed out.
E_NO_IPC Routing Engine connection was lost.
E_ORE_M Other Routing Engine state was changed to master.
E_ORE_B Other Routing Engine state was changed to backup.
E_ORE_D Other Routing Engine state was changed to disabled.
user@host> show log mastership
Chapter 28: Host Redundancy Overview
request chassis routing-engine master acquire
request chassis routing-engine master release
request chassis routing-engine master switch
was issued
was issued
was issued from
583