Locate The Pcg Serial Number Id Label; Figure 254: Pcg Serial Number Id Label; Replace The Pcg - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Sample Output
Meaning

Locate the PCG Serial Number ID Label

Purpose
Action
Related
Documentation

Replace the PCG

476
user@host> show chassis hardware
Hardware inventory:
Item Version
Chassis
Midplane REV 03
FPM CMB REV 02
FPM Display REV 02
CIP REV 04
PEM 0 Rev 03
PEM 1 Rev 03
PCG 0 REV 02
PCG 1 REV 02
The command output displays the PCG slot number, revision level, part number, and
serial number.
To locate the serial number ID on the PCG.
To locate the PCG serial number ID label, look on the top of the PCG, close to the midplane
connector. See Figure 254 on page

Figure 254: PCG Serial Number ID Label

Checklist for Monitoring the PCG on page 465
The PCGs are hot-pluggable. You can remove and replace them without powering down
the router, but the routing functions of the system are interrupted when the PCG is
removed.
If both PCGs are installed and functioning normally, PCG0 is the master PCG and PCG1
is the backup by default.
Part number Serial number
20079
710-001245 AB4132
710-001642 AB3264
710-001647 AB3046
710-001593 AB3284
740-001243 KM28409
740-001243 KM13359
710-001568 AB3013
710-001568 AB3000
476.
Description
M160
DC
DC
Copyright © 2012, Juniper Networks, Inc.