Figure 240: M40E And M160 Router Host Module Location; Check The Host Module Status - Juniper M Series Monitoring And Troubleshooting Manual

Figure 240: M40e and M160 Router Host Module Location

Related
Documentation

Check the Host Module Status

Purpose
Action
Copyright © 2012, Juniper Networks, Inc.
This chapter provides basic information about monitoring the Routing Engine and the
MCS.
Checklist for Monitoring the Routing Engine on page 165
Checklist for Monitoring the MCS on page 455
To verify the host module status by using the command line or checking the LEDs on the
craft interface.
To check the host module status, use the following command:
user@host> show chassis craft-interface
user@host> show chassis craft-interface
[...Output truncated...]
Front Panel System LEDs:
Host 0 1
------------------------
OK * .
Fail . .
Master * .
[...Output truncated...]
Chapter 17: Monitoring the Host Module
437