Monitoring The Craft Interface Status - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Table 64: Router Craft Interface Characteristics Per Routing Platform (continued)
M5
Characteristic /M10
PIC online and X
offline buttons
FPC LEDs
FPC offline
buttons
Power Supply
LEDs
HCM LEDs
Related
Documentation

Monitoring the Craft Interface Status

Viewing the Craft Interface Status
Purpose
Action
Checking the Craft Interface Environmental Status
Purpose
Action
256
M7i M10i M20 M40
X X
X X
X
X
Checklist for Monitoring the Craft Interface on page 249
Viewing the Craft Interface Status on page 256
Checking the Craft Interface Environmental Status on page 256
To determine a craft interface failure by checking the craft interface status.
To view the craft interface status, look at the craft interface panel on the front of the
router chassis.
When the craft interface fails, you might not see any lights on the craft interface panel
and the LCD display will be blank. In addition, the buttons on the panel might not work
as indicated.
You can view the craft interface information with the following command:
user@host> show chassis craft-interface
If the craft interface fails, you can still view current craft interface information at the
command line. A craft interface failure or removal generates a red alarm.
To check the environmental status of the craft interface.
To view the craft interface status, use the following command:
user@host> show chassis environment
M40e M120 M160 M320
X X X X
X
X X
Copyright © 2012, Juniper Networks, Inc.
TX
T320 T640 T 1 6 0 0 Matrix
X X X
TX
Matrix
Plus
X