M Series and T Series Routers Monitoring and Troubleshooting Guide
Displaying the PIC Hardware Information
Purpose
Action
Sample Output
Meaning
Locating the PIC Serial Number ID Label
Purpose
Action
244
c. Check the PIC status by looking at the PIC LEDs and using the
command (see
pic-status
If the PIC works, then the PIC you removed is defective. Contact JTAC and generate
4.
an RMA. See
"Return the Failed Component" on page
To check the PIC hardware information.
To display PIC hardware information, use the following command:
user@host> show chassis hardware
user@host> show chassis hardware
[...Output truncated...]
FPC 0
REV 03
CPU
REV 02
PIC 1
REV 05
PIC 2
REV 05
PIC 3
REV 01
FPC 1
REV 02
CPU
REV 02
PIC 0
REV 03
PIC 1
REV 01
FPC 2
CPU
REV 03
PIC 0
REV 01
The command output displays the PIC number, revision level, part number, serial number,
and media type.
To locate the serial number ID on the PIC.
To locate the PIC serial number ID label, do one of the following:
With the PIC in horizontal position, look on the right side of the top of the PIC (see
Figure 98 on page
245).
"Display the PIC Media Type and FPC Status" on page
710-001255
S/N AA9806
710-001217
S/N AA9590
750-000616
S/N AA1527
750-000616
S/N AA1535
750-000616
S/N AA1519
710-001611
S/N AA9523
710-001217
S/N AA9571
750-001900
S/N AA9626
710-002381
S/N AD3633
710-001217
S/N AB3329
show chassis fpc
116.
FPC Type 1
1x OC-12 ATM, MM
1x OC-12 ATM, MM
1x OC-12 ATM, MM
FPC Type 2
1x STM-16 SDH, SMIR
2x G/E, 1000 BASE-SX
FPC Type OC192
1x OC-192 SM SR-2
Copyright © 2012, Juniper Networks, Inc.
239).