Table 85: Tx Matrix Plus Router Power Supply Leds - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Related
Documentation
300
Table 84: TX Matrix Router Three-Input 240-A DC Power Supply
LEDs (continued)
LED Color
—One per Blue
DC OK
power supply
Green
INPUT
PRESENT —One
per input
Yellow
OVER
—One per
TEMP
power supply
Table 85 on page 300 describes the functions of the TX Matrix Plus router DC power supply
LEDs.

Table 85: TX Matrix Plus Router Power Supply LEDs

Label Color
Green
OK
–
Red
FAIL
–
Power Supplies Overview on page 275
State
On steadily
Blinking
On steadily
Off
On steadily
Off
State Description
On steadily The power supply is functioning normally.
Off The power supply is not functioning normally.
On steadily The power supply has failed.
Off No faults have been detected for the power supply.
Description
When the power supply is correctly
set to mode and
2-INPUT INPUT 0
and are properly energized,
INPUT 1
the LED indicates that the
DC OK
power supply is functioning
normally.
Power supply is starting up, is not
functioning, is not properly
installed, or is not operating
properly.
Input is receiving voltage.
Input voltage is not present.
Power supply has exceeded
recommended temperature.
Power supply is within the
recommended temperature or the
power supply is not on.
Copyright © 2012, Juniper Networks, Inc.