Checking Pic Alarms; Checking The Current Chassis Alarms; Display The Error Messages In The System Log File - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Related
Documentation

Checking PIC Alarms

Checking the Current Chassis Alarms

Purpose
Action
Sample Output
Meaning

Display the Error Messages in the System Log file

Purpose
Action
242
Checklist for Monitoring PICs on page 235
To check for PIC alarms:
Checking the Current Chassis Alarms on page 242
1.
Display the Error Messages in the System Log file on page 242
2.
To determine the details of the active PIC alarms.
To display current PIC alarms, use the following command:
user@host> show chassis alarms
user@host> show chassis alarms
1 alarms currently active
Alarm time
2002-04-08 10:01:20 PDT
The command output displays the alarm time, severity level, and description.
You can also display PIC alarms by using the following command:
user@host> show chassis craft-interface
user@host> show chassis craft-interface
Red alarm: LED on, relay on
Yellow alarm: LED off, relay off
Host OK LED: On
Host fail LED: Off
FPCs 0 1 2 3 4
-------------------------------
Green * . . * .
Red . . . . .
LCD screen:
+--------------------+
|myrouter
|1 Alarm active
|R: PIC 0/2 FAILED
|
+--------------------+
To determine PIC failure by checking the details of the PIC error messages in the system
log file.
To display PIC error messages in the system log file, use the following command:
Class Description
Major PIC 0/2 failed to initialize
5 6 7
. . .
. . .
|
|
|
|
Copyright © 2012, Juniper Networks, Inc.