Monitor The Scg Status; Monitor The Scg Environmental Status - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Related
Documentation

Monitor the SCG Status

Monitor the SCG Environmental Status

Purpose
Action
Sample Output
Meaning
404
Checklist for Monitoring the SCG on page 401
To monitor the SCG status:
Monitor the SCG Environmental Status on page 404
1.
Display the SCG LED States at the Command Line on page 405
2.
Check the SCG LEDs States on the Faceplate on page 405
3.
To obtain information about the SCG environmental status.
To monitor the SCG environment status, use the following command:
user@host> show chassis environment
t320@host> show chassis environment
Class Item
Power PEM 0
PEM 1
Temp SCG 0
SCG 1
[...Output truncated...]
The command output displays the status and temperature for each SCG.
If there is a problem with the SCG status, you can display more detailed SCG
environmental information with the following command:
user@host> show chassis environment scg
The command output is as follows:
t320@host> show chassis environment scg
SCG 0 status:
State
Temperature
Power:
GROUND
3.3 V
5.0 V
5.6 V
1.8 V bias
3.3 V bias
5.0 V bias
8.0 V bias
BUS Revision
SCG 1 status:
State
Temperature
Power:
GROUND
Status Measurement
Absent
OK
OK 30 degrees C / 86 degrees F
OK 29 degrees C / 84 degrees F
Online - Master clock
30 degrees C / 86 degrees F
0 mV
3317 mV
5072 mV
5697 mV
1794 mV
3304 mV
4991 mV
7318 mV
40
Online - Standby
29 degrees C / 84 degrees F
0 mV
Copyright © 2012, Juniper Networks, Inc.