Display Pcg Messages In The System Log File - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Meaning

Display PCG Messages in the System Log File

Purpose
Action
Sample Output
Meaning
Display PCG Error Messages in the Chassis Daemon Log File
Purpose
Action
712
Setting
Measurement
Power:
3.3 V
5.0 V bias
8.0 V bias
CMB Revision
PCG 1 status:
State
Temperature
Frequency:
Setting
Measurement
Power:
3.3 V
5.0 V bias
8.0 V bias
CMB Revision
When the replaced PCG is brought online, it does not automatically become master. It
remains as the backup PCG until the master PCG fails, or you manually switch it to master
by using the
request chassis pcg online slot 1
To determine the details of the PCG error messages in the system log file.
To display the PCG error messages in the system log file to verify that a replaced PCG
is online, use the following command:
user@host> show log messages | match PCG
user@host> show log messages | match PCG
Aug 27 15:20:52 myrouter craftd[563]: Minor alarm cleared, PCG 0 Not Online
Aug 27 15:20:52 myrouter alarmd[562]: Alarm cleared: PCG color=YELLOW,
class=CHASSIS, reason=PCG 0 Not Online
The messages system log file records the time the failure or event occurred, the severity
level, a code, and a message description. You can also use the
command to see error messages that are generated when a PCG fails or is
| match pcg
offline. Use this information to diagnose a problem and to let the Juniper Networks
Technical Assistance Center (JTAC) know what error messages were generated and the
router events that occurred before and after the problem. For more information about
system log messages, see the Junos OS System Log Messages Reference.
To determine the details of the PCG error messages in the chassis daemon log file.
To display the PCG error messages in the chassis daemon (
that a replaced PCG is online, use the following command:
user@host> show log chassisd | match PCG
125.00 MHz
125.01 MHz
3278 mV
4986 mV
8222 mV
12
Online - PFE clock source
43 degrees C / 109 degrees F
125.00 MHz
124.95 MHz
3269 mV
4991 mV
8222 mV
12
command.
Copyright © 2012, Juniper Networks, Inc.
show log messages
log file and verify
chassisd)