Display Component Error Messages In The System Log File; Display Component Errors In The Chassis Daemon Log File - Juniper M Series Monitoring And Troubleshooting Manual

Display Component Error Messages in the System Log File

Purpose
Action
Sample Output
Meaning

Display Component Errors in the Chassis Daemon Log File

Purpose
Action
Sample Output
Copyright © 2012, Juniper Networks, Inc.
To determine the details of the component error messages in the System Log File.
To display component error messages in the
operational mode command:
user@host> show log messages
user@host> show log messages
[...Output truncated...]
Apr 17 11:12:45 tylenol scb CM: ALARM SET: (Major) Power Supply B fan failed
Apr 17 11:12:46 tylenol scb CM: ALARM CLEAR: Power Supply B fan failed
Apr 17 11:12:46 tylenol alarmd[590]: Alarm cleared: Pwr supply color=RED,
class=CHASSIS, reason=Power Supply B fan failed
Apr 17 11:13:09 tylenol alarmd[590]: Alarm set: Pwr supply color=RED,
class=CHASSIS, reason=Power Supply B fan failed
Apr 17 11:13:09 tylenol scb CM: ALARM SET: (Major) Power Supply B fan failed
Apr 17 11:13:10 tylenol alarmd[590]: Alarm cleared: Pwr supply color=RED,
class=CHASSIS, reason=Power Supply B fan failed
Apr 17 11:13:10 tylenol scb CM: ALARM CLEAR: Power Supply B fan failed
[...Output truncated...]
The system log file records the time the failure or event occurred, the severity
messages
level, a code, and a message description. You can use the date and time to browse the
messages log file, or you can use the
command to view error messages that are specific to a particular component. For
example, the command output shows the common power supply error messages logged
from the router. In the filter expression, if there is a space in the component name, enclose
the component name in quotation marks, for example
Use system log file information to isolate a component problem and to let the Juniper
Networks Technical Assistance Center (JTAC) know what error messages were generated
at the time of the event. For more information about system log messages, see the Junos
OS System Log Messages Reference.
To determine the details of the component error messages in the Chassis Daemon Log
File.
To display component error messages in the chassis daemon (
following command:
user@host> show log chassisd
user@host> show log chassisd
Jun 11 20:45:08 *** inventory change ***
Jun 11 20:45:08 CIP set alarm 0x1
Jun 11 20:45:08 alarm op fru 34 op 1 reason 1
Chapter 5: Monitoring the Router Chassis
messages system log file, use the following
show log messages | match component-name
| match " power supply"
chassisd
.
) log file, use the
161