Replacing The Cable Management System; Maintaining Routing Engine External Cables - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

M Series and T Series Routers Monitoring and Troubleshooting Guide

Documentation

Documentation

Replacing the Cable Management System

Documentation

Checklist for Maintaining Cables and Connectors on page 351

The CIP contains connectors for connecting the Routing Engines to a console, a network,

an external management device, or an external alarm device.

To maintain the Console or Auxiliary Port cable, the Ethernet Management cable, or the

alarm relay cables, see the appropriate router hardware guide.

Checklist for Maintaining Cables and Connectors on page 351

The cable management system is hot-removable and hot-insertable. You can remove

or replace the cable management system without powering down the system and

disrupting routing functions.

To replace the cable management system, see the appropriate router hardware guide.

Checklist for Maintaining Cables and Connectors on page 351