Table 137: Checklist For Monitoring Redundant Routing Engines - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Related
Documentation
Understanding Redundant Routing Engines
Redundant Routing Engines Overview
592

Table 137: Checklist for Monitoring Redundant Routing Engines

(continued)
Monitor Redundant Routing Engine Tasks
"Display the Redundant Routing Engines
Installed in the Router" on page 600
"Display Redundant Routing Engine
Mastership and Backup" on page 602
"Displaying Redundant Routing Engine
Errors" on page 603
"Manually Switch from Master to Backup
Routing Engine" on page 603
"Replace a Redundant Routing Engine"
on page 605
Checklist for Monitoring the Routing Engine on page 165
Redundant Routing Engines Overview on page 592
Redundant Routing Engines Overview on page 592
Redundant Routing Engine Characteristics on page 593
M10i Router Routing Engine Redundancy on page 593
M20 Router Routing Engine Redundancy on page 594
M40e and M160 Router Routing Engine Redundancy on page 594
M320 Router Routing Engine Redundancy on page 595
T320 Router, T640 Router, and T1600 Router Routing Engine Redundancy on page 596
TX Matrix Router and TX Matrix Plus Router Routing Engine Redundancy on page 598
Inspect redundant Routing Engines to minimize system process failures.
Redundant Routing Engines are two Routing Engines that are installed in the same router.
One functions as the master, while the other stands by as a backup should the master
Routing Engine fail. By default, the Routing Engine in slot
one in slot is the backup (
1
Command or Action
show chassis hardware
show chassis routing-engine
See "Monitor the Routing Engine Status" on
page 178.
show chassis routing-engine
show log mastership
request chassis routing-engine master release
request chassis routing-engine master switch
See "Replace a Failed Component" on
page 162.
).
RE1
0 is the master ( RE0 ) and the
Copyright © 2012, Juniper Networks, Inc.