Monitoring The Cip; Checklist For Monitoring The Cip - Juniper M Series Monitoring And Troubleshooting Manual

CHAPTER 21

Monitoring the CIP

Checklist for Monitoring the CIP

Purpose
Action
Copyright © 2012, Juniper Networks, Inc.
Checklist for Monitoring the CIP on page 479
CIP Overview on page 480
Monitor the CIP Status on page 482
Check for CIP Alarms on page 483
Verify CIP Failure on page 484
Get CIP Hardware Information on page 486
Replace the CIP on page 487
To monitor the Connector Interface Panel (CIP) to ensure management connection to
the M40e, M160, M320, T320, and T640 router Routing Engines, Building Integrated
Timing Source (BITS) interfaces for the Miscellaneous Control Subsystem (MCS), and
alarm relay contacts. (See
Table 121: Checklist for Monitoring the CIP
Tasks for Monitoring the CIP
"Monitor the CIP Status" on page 482
"Check for CIP Alarms" on page 483
1. Display Current CIP Alarms on page 483
2. Display CIP Error Messages in the System
Log File on page 483
3. Display CIP Error Messages in the Chassis
Daemon Log File on page 484
"Verify CIP Failure" on page 484
1. Check the CIP Connection on page 484
Table 121 on page 479.)
Command or Action
show chassis environment
show chassis alarms
show log messages
show log chassisd
Check the connector screws on the CIP faceplate.
479