Juniper M Series Monitoring And Troubleshooting Manual page 154

M Series and T Series Routers Monitoring and Troubleshooting Guide
110
Table 35: TX Matrix and TX Matrix Plus Router Chassis Component Alarm
Conditions (continued)
Chassis
Component Alarm Condition
Routing Engine Error in reading or writing hard
disk.
Error in reading or writing
CompactFlash card.
System booted from the
default backup Routing
Engine. If you manually
switched mastership, ignore
this alarm condition.
System booted from the hard
disk.
Compact flash is missing in
boot list.
Hard disk is missing in boot
list.
Routing Engine failed to boot.
Power supplies A power supply was removed
from the chassis.
A power supply has failed.
Alarm
Remedy Severity
Reformat the hard disk Yellow
and install a bootable
image. If this fails,
replace the failed
Routing Engine.
Reformat the Yellow
CompactFlash card and
install a bootable
image. If this fails,
replace the failed
Routing Engine.
Install a bootable image Yellow
on the default master
Routing Engine. If this
fails, replace the failed
Routing Engine.
Install a bootable image Yellow
on the CompactFlash
card. If this fails, replace
the failed Routing
Engine.
Replace the failed Red
Routing Engine.
Replace the failed Red
Routing Engine.
Replace the failed Red
Routing Engine.
Insert a power supply Yellow
into an empty slot.
Replace the failed Red
power supply.
Copyright © 2012, Juniper Networks, Inc.