Display The Fpc Hardware Information; Locating The Fpc Serial Number Id Label - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

M Series and T Series Routers Monitoring and Troubleshooting Guide

Documentation

Display the FPC Hardware Information

Sample Output

Documentation

JUNOS Base OS boot [5.5R1.2]

JUNOS Base OS Software Suite [5.5R1.2]

JUNOS Kernel Software Suite [5.5R1.2]

JUNOS Packet Forwarding Engine Support [5.5R1.2]

JUNOS Routing Software Suite [5.5R1.2]

JUNOS Online Documentation [5.5R1.2]

JUNOS Crypto Software Suite [5.5R1.2]

The command output displays the router hostname, model number, and the version of

software running on the router. The kernel software version is important when diagnosing

FPC issues. You will need this information when you contact JTAC.

Checklist for Monitoring FPCs on page 213

To obtain the FPC hardware information.

To display the FPC hardware information, use the following command:

user@host> show chassis hardware

Hardware inventory:

[...Output truncated...]

The command output displays each FPC installed in the router, including the version

level, part number, serial number, and description. The output also displays a description

of the PICs installed in each FPC. You will need this information when you contact JTAC.

Checklist for Monitoring FPCs on page 213

To locate the serial number ID on the M7i router Routing Engine.

Serial number

1x OC-48 SONET, SMIR

1x OC-12 SONET, SMIR

1x OC-12 ATM, MM

1x OC-12 SONET, SMIR

4x OC-3 SONET, MM

1x G/E, 1000 BASE-SX

4x OC-3 SONET, SMIR