Juniper M Series Monitoring And Troubleshooting Manual page 347

Sample Output
Copyright © 2012, Juniper Networks, Inc.
Table 86: Power Supply Alarms (continued)
Craft Interface LCD
Power Supplies Short Version
T320 PEM pem-number Removed
PEM pem-number Over Temp
PEM pem-number Output Fail
PEM pem-number Input Fail
T640 and T1600
PEM pem-number Removed
PEM pem-number Over Temp
PEM pem-number Output Fail
PEM pem-number Input Fail
TX Matrix and TX
PEM pem-number Removed
Matrix Plus
PEM pem-number Over Temp
PEM pem-number Output Fail
PEM pem-number Input Fail
For information about what conditions trigger power supply alarms and their remedy for
each router type, see "Display the Current Router Alarms" on page
To display current power supply alarms and the alarm indicator states, use the following
command:
user@host> show chassis craft-interface
user@host> show chassis craft-interface
Red alarm: LED on, relay on
Yellow alarm: LED off, relay off
Host OK LED: On
Host fail LED: Off
Chapter 10: Monitoring Power Supplies
CLI Long Version
YELLOW ALARM - PEM pem-number
Removed
RED ALARM - PEM pem-number Over
Temperature
RED ALARM - PEM pem-number Output
Failure
RED ALARM - PEM pem-number Input
Failure
—
YELLOW ALARM PEM pem-number
Removed
—
RED ALARM PEM pem-number Over
Temperature
—
RED ALARM PEM pem-number Output
Failure
—
RED ALARM PEM pem-number Input
Failure
—
YELLOW ALARM PEM pem-number
Removed
RED ALARM — PEM pem-number Over
Temperature
RED ALARM — PEM pem-number Output
Failure
RED ALARM — PEM pem-number Input
Failure
67.
303