Monitor Redundant Pcg Status; Monitor The Redundant Pcg Environmental Status - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Sample Output
Meaning
Related
Documentation

Monitor Redundant PCG Status

Monitor the Redundant PCG Environmental Status

Purpose
Action
Sample Output
Meaning
706
user@host> show chassis hardware
Hardware inventory:
Item Version
Chassis
Midplane REV 03
FPM CMB REV 02
FPM Display REV 02
CIP REV 04
PEM 0 Rev 03
PEM 1 Rev 03
PCG 0 REV 02
PCG 1 REV 02
[...Output truncated...]
The command output displays the PCG slot number, revision level, part number, and
serial number.
Checklist for Monitoring Redundant PCGs on page 703
To monitor the PCG status:
Monitor the Redundant PCG Environmental Status on page 706
1.
Display the Redundant PCG Status from the Craft Interface on page 707
2.
3. Check the PCG LED Status on the Faceplate on page 708
To check the redundant PCG by monitoring the redundant PCG environmental status.
To monitor the PCG environment status, use the following command:
user@host> show chassis environment
user@host> show chassis environment
Class Item
Power PEM 0
PEM 1
Temp PCG 0
PCG 1
[...Output truncated...]
The command output displays the slot number, status, and temperature of each PCG.
If there is a problem with the PCG status, you can display more detailed PCG
environmental information with the following command:
user@host> show chassis environment pcg
Part number Serial number
20079
710-001245 AB4132
710-001642 AB3264
710-001647 AB3046
710-001593 AB3284
740-001243 KM28409
740-001243 KM13359
710-001568 AB3013
710-001568 AB3000
Status Measurement
OK
OK
OK 41 degrees C / 105 degrees F
OK 39 degrees C / 102 degrees F
Description
M160
DC
DC
Copyright © 2012, Juniper Networks, Inc.