Displaying Redundant Ssb Mastership; Display Ssb Mastership From The Command Line; Check The Ssb Mastership From The Leds - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

M Series and T Series Routers Monitoring and Troubleshooting Guide

Documentation

Displaying Redundant SSB Mastership

Sample Output

Table 158: SSB LED States (continued)

Checklist for Monitoring Redundant SSBs on page 715

To display the SSB mastership information:

Display SSB Mastership from the Command Line on page 722

Check the SSB Mastership from the LEDs on page 722

To determine SSB mastership from the command line.

To display more detailed SSB status information, use the following command:

user@host> show chassis ssb

Temperature:

CPU utilization:

Interrupt utilization:

Heap utilization:

Buffer utilization:

The command output displays the number of times the mastership has changed, the

SSB slot number

and the current state of the SSB:

command output displays the temperature of the air passing by the SSB, in degrees

Centigrade. It also displays the total percentage of CPU, interrupt, heap space, and buffer

space being used by the SSB processor, including the total DRAM available to the SSB

processor. The command output displays the time when the SSB started running and

how long it has been running.

To verify the SSB mastership from the LEDs on the faceplate.

I/O interrupts are occurring.

33 Centigrade

1999-01-15 22:05:36 UTC

21 hours, 21 minutes, 22 seconds