Juniper M Series Monitoring And Troubleshooting Manual page 153

Copyright © 2012, Juniper Networks, Inc.
Table 35: TX Matrix and TX Matrix Plus Router Chassis Component Alarm
Conditions (continued)
Chassis
Component Alarm Condition
FPC An FPC has an out-of-range
or invalid temperature reading.
An FPC microcode download
has failed.
An FPC has failed. If this
occurs, the FPC attempts to
reboot. If the SCB sees that an
FPC is rebooting too often, it
shuts down the FPC.
Too many hard errors in FPC
memory.
Too many soft errors in FPC
memory.
Hot swapping Too many hot-swap interrupts
are occurring. This message
generally indicates that a
hardware component that
plugs into the router's
backplane from the front
(generally, an FPC) is broken.
Chapter 3: Method and Tools for Monitoring Router Components
Remedy
Replace the failed FPC.
Replace the failed FPC.
Replace the failed FPC.
Replace the failed FPC.
Replace the failed FPC.
-----------------------------------
Alarm
Severity
Yellow
Red
Red
Red
Red
Red
109