Figure 337: M40E And M160 Router Sfm Location; Check M40E Router Redundant Sfm Configuration - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide

Figure 337: M40e and M160 Router SFM Location

Related
Documentation

Check M40e Router Redundant SFM Configuration

Purpose
Action
686
Monitoring Redundant SFMs on page 683
You can configure which SFM is the master and which is the backup. By default, the SFM
in slot 0 is the master and the SFM in slot 1 is the backup. You can modify the default
configuration by including the
level.
NOTE: We recommend that both Routing Engines have the same
configuration.
To display the current SFM redundancy configuration:
Enter configuration mode using the following command:
1.
user@host# configure
Go to the
[edit chassis redundancy]
2.
Show the SFM configuration using the following command:
3.
user@host# show
sfm statement at the [edit chassis redundancy]
hierarchy level.
Copyright © 2012, Juniper Networks, Inc.
hierarchy