Figure 280: Feb Serial Number Id Label; Display The Feb Firmware Information; Locate The Feb Serial Number Id Label - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Meaning

Display the FEB Firmware Information

Purpose
Action
Sample Output
Meaning

Locate the FEB Serial Number ID Label

Purpose
Action
Related
Documentation
560
The command output displays the FEB version level, part number, serial number, and
description.
To determine the firmware running on the FEB.
To display the firmware running on the FEB, use the following command:
user@host> show chassis firmware
user@host> show chassis firmware
Part
Forwarding engine board
The command output displays the type and version level of the firmware running on the
FEB.
To locate the serial number ID on the FEB.
To locate the FEB serial number ID label, look near the back on the right side of the FEB
(see Figure 280 on page 560).

Figure 280: FEB Serial Number ID Label

Checklist for Monitoring the FEB on page 553
Type Version
ROM Juniper ROM Monitor Version 4.1b2
O/S Version 4.1I1 by tlim on 2000-04-24 11:27
Copyright © 2012, Juniper Networks, Inc.