Juniper M Series Monitoring And Troubleshooting Manual page 235

Related
Documentation
Check the Redundant Routing Engine Status from the Craft Interface CLI Output
Purpose
Action
Copyright © 2012, Juniper Networks, Inc.
Table 54: TX Matrix Plus Routing Engine RE-C2600 LEDs (continued)
Label Color
Blue
SSD1
–
SSD2 Blue
–
Green
CF
–
TX Matrix Plus Router Overview on page 43
To check the status of the redundant routing engine from the craft interface CLI output.
To view the Routing Engine status from the craft interface, use the following CLI command:
user@host> show chassis craft-interface
For M10i routers:
user@host> show chassis craft-interface
Red alarm:
Yellow alarm:
Routing Engine OK LED:
Routing Engine fail LED: Off
FPCs 0 1
-------------
Green * *
Red . .
LCD screen:
+--------------------+
|waddle
|1 Alarm active
|Y: Backup RE Active |
|
+--------------------+
For M20 routers:
user@host> show chassis craft-interface
Red alarm:
Yellow alarm:
Routing Engine OK LED:
Routing Engine fail LED: Off
State Description
On steadily Indicates disk activity.
Off There is no disk activity.
On steadily Indicates disk activity.
Off There is no disk activity.
On steadily Indicates activity for the CompactFlash card.
Off There is no activity for the CompactFlash card.
LED off, relay off
LED on, relay on
On
|
|
|
LED off, relay off
LED off, relay off
On
Chapter 6: Monitoring the Routing Engine
191