Check The Routing Engine Leds; Check The M7I Routing Engine Leds - Juniper M Series Monitoring And Troubleshooting Manual

M Series and T Series Routers Monitoring and Troubleshooting Guide
Related
Documentation

Check the Routing Engine LEDs

Check the M7i Routing Engine LEDs

Purpose
Action
180
(For M7i, M10i, M40e, M120, M160, M320, T320, and T640 routers) To check the status
and temperature of the Routing Engines, use the following command:
user@host> show chassis environment routing-engine
user@host> show chassis environment routing-engine
Route engine 0 status:
State:
Temperature:
Route engine 1 status:
State:
The command output displays the Routing Engine slot number, operating state,
temperature, and whether it is operating as the master or backup. The state can be
or .
Present Absent
To check the status and temperature of a particular Routing Engine, use the following
command:
user@host> show chassis environment routing-engine slot
Routing Engine Overview on page 168
To check the Routing Engine status LEDs, do one of the following:
Check the M7i Routing Engine LEDs on page 180
1.
Check the M10i Router Routing Engine LEDs on page 181
2.
Check the M20 Router Routing Engine LEDs on page 182
3.
Check the M40 Router Routing Engine LEDs on page 183
4.
5. Check the M120 Router Routing Engine LEDs on page 184
Check the M40e and M160 Router Routing Engine LEDs on page 185
6.
Check the M320 Router Routing Engine LEDs on page 186
7.
Check the T320 Router Routing Engine LEDs on page 187
8.
Check the T640 Router Routing Engine LEDs on page 187
9.
Check the T1600 Router Routing Engine LEDs on page 188
10.
Check the four LEDs located on the Routing Engine faceplate. A green LED labeled
a blue LED labeled MASTER
indicate Routing Engine status.
Table 42 on page 181 describes the LED states.
Present Master
0 degrees C / 32 degrees F
Present
, a red LED labeled FAIL , and a green LED labeled ONLINE
Copyright © 2012, Juniper Networks, Inc.
,
HDD