Packing And Returning Components; Tools And Parts Required To Remove Components From A Ptx5000 Packet Transport Router - Juniper PTX5000 Hardware Manual

CHAPTER 40

Packing and Returning Components

Tools and Parts Required to Remove Components from a PTX5000 Packet Transport
Router
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Tools and Parts Required to Remove Components from a PTX5000 Packet Transport
Router on page 575
Packing the PTX5000 Packet Transport Router for Shipment on page 576
Packing PTX5000 Components for Shipment on page 577
To remove components from the packet transport router or the packet transport router
from a rack, you need the following tools and parts:
2.5-mm flat-blade (–) screwdriver, for detaching alarm relay terminal block
7/16-in. (11-mm) nut driver
Blank panels to cover empty slots
Electrostatic bag or antistatic mat, for each component
Electrostatic discharge (ESD) grounding wrist strap
Flat-blade (–) screwdriver
Mechanical lift (for the chassis)
Phillips (+) screwdrivers, numbers 1 and 2
Rubber safety cap for fiber-optic interfaces and cable
Wire cutters
Packing the PTX5000 Packet Transport Router for Shipment on page 576
Packing PTX5000 Components for Shipment on page 577
575